USB 2.0 To Micro Cable
USB 2.0 to micro cable,customer design cable assembly
Model Number : automotive wire harness 63
Place Of Origin : Olink
Capacity : 1.5 USD
MOQ : 20 * 20 * 10 Centimeters
SGS IATF16949,CE certificateion cable
Plastic shell: nylon PA66
Terminal: tinned copper
Wire: copper core, PVC jacket
Rated temperature: -25 to +85°C
Wire harness: PVC, rubber, silicone
Operating frequency: 50/60Hz
Applicable current: 3A
Applicable voltage: 250V AC/DC
Flammability rating: 94V, VW-1, CSA FT1
1 Connectors could be TE, Molex, JST, Deutsch, Hirschmann, Delphi, FCI or equivalents.
2 Cables can use UL.CCC,CE.VDE,CSA,AS/NZ,PSE proved.
3 Free Samples can be supplied after quotation confirmed.
4 Strict quality control following ISO management system.
5 All the products are 100% test before delivery
6 All kinds of our products are ROHS compliant.
7 ODM/OEM order, trial order and customized cable are welcomed.
8 Our engineers have more than 12years experience on wiring harness design so that we can work with you to find the best solution to not only meet requirements but also control costs.
Wire Harness Assembly Process
These processes include but are not limited to the following:
Installing the wires and/or subassemblies on the assembly board.
Routing wires and/or subassemblies through any required sleeves.
Applying wraps, ties, or tapes, particularly on any branch-outs.
Crimping terminals onto wires, especially if more than one wire goes into one terminal.
It is difficult to automate the processes used in the building of a wire harness. Manual production remains more cost effective than automation, especially with small batch sizes. Pre-production or kitting of a harness can be somewhat automated.
This would impact the following steps:
Cutting and identifying individual wires (cutting/stripping machine).
Crimping terminals onto one or both sides of the wire.
Partial plugging of wires prefitted with terminals into connector housings.
Soldering of wire ends (solder machine).