Chinese Professional Consumer Cable Assembly - Waterproof right angle m12 female sensor cable – Olink
Chinese Professional Consumer Cable Assembly - Waterproof right angle m12 female sensor cable – Olink Detail:
Model Number:sensor cable-06
Cable harnesses are usually designed according to geometric and electrical requirements. A diagram is then provided (either on paper or on a monitor) for the assembly preparation and assembly.
The wires are first cut to the desired length, usually using a special wire-cutting machine. The wires may also be printed on by a special machine during the cutting process or on a separate machine. After this, the ends of the wires are stripped to expose the metal (or core) of the wires, which are fitted with any required terminals or connector housings. The cables are assembled and clamped together on a special workbench, or onto a pin board (assembly board), according to the design specification, to form the cable harness. After fitting any protective sleeves, conduit, or extruded yarn, the harness is either fitted directly in the vehicle or shipped.
In spite of increasing automation, hand manufacture continues to be the primary method of cable harness production in general, due to the many different processes involved, such as:
Routing wires through sleeves,
Taping with fabric tape, in particular on branch outs from wire strands,
Crimping terminals onto wires, particularly for so-called multiple crimps (more than one wire into one terminal),
Inserting one sleeve into another,
Fastening strands with tape, clamps or cable ties.
It is difficult to automate these processes, with major suppliers still using manual means of production, only automating portions of the process. Manual production remains more cost effective than automation, especially with small batch sizes.
Pre-production can be automated in part. This affects:
Cutting individual wires (cutting machine),
Wire stripping (Automated Wire Stripping Machines),
Crimping terminals onto one or both sides of the wire,
Partial plugging of wires prefitted with terminals into connector housings (module),
Soldering of wire ends (solder machine),
Key Specifications/Special Features:
- M12 circular connector according to IEC 61076-2-101
- Indus connector M12 circular connector with M12*1.0 screw locking equivalent to Binder, Phoenix, Lumburger automation
- Waterproof rating is IP67, protected from dust and water during immersion, resistant to many oils and chemical
- Coding: A, B, C, D, T, S, X
- Pins: 3, 4, 5, 8, 12 pins
- Stainless steel screw is available
- IP67/IP68, RoHS, REACH, UL certificates
- Connector series: M12
- Gender: male
- Connector locking system: fix screw
- Connector design: cable plug
- Mechanical operation: >100 mating cycles
- Waterproof rating: IP67/IP68
- Ambient temperatures: -25℃ – +85℃
- Connector body: PA66+GF
- Contacts: brass with gold plated
- Screw/nut: brass with nickel plated
- Waterproof 0-ring: FKM
- Cable jacket: PVC/PUR
- Over-mold material: PVC/TPU
Western EuropeOur in-house procession includes molding and tooling, wire and cable extrusion, connector and socket assembly, precision metal stamping, wire harness and cable assembly. We provide full range of automotive connector and socket for all types best sell cars.
Olink products are widely used in automotive electronics devices such as security system, AV system, Multimedia system etc., as well as in electric vehicles, UTVs, land lawn trucks, medical equipment, sports equipment, casino machines, ATM, home appliances, consumer electronics and LED lighting. Materials that applied are ROSH/Reach/CA65 compliant and with UL/CUL, VDE, CCC approval. Auto wire and cables are according to SAE/JASO/DIN standards. We will obtain the latest IATF16949 in May 2018.
We exports to Europe, Mid-east, America, Australia and Japan market. Our known customers includes 3M, Yamaha, Honeywell, Valeo, VDO and Visteon.
Our factory locates in Huizhou City, Guangdong Province, just one hour driving to Shenzhen. With total 17,000 square meters workshop area, we have nearly 700 colleagues.
Run with ERP and CRM system, We always adhere to the virtue of BE RELIABE PARTNER,CREAT EXTRA VALUE FOR CUSTOMER AND GROW WITH CUSTOMER
- FOB Port:Shenzhen
- Lead Time:7 – 15 days
Main Export Markets:
- Central/South America
- North America
Product detail pictures:
Related Product Guide:
The incredibly rich projects administration experiences and a person to 1 service model make the substantial importance of organization communication and our easy understanding of your expectations for Chinese Professional Consumer Cable Assembly - Waterproof right angle m12 female sensor cable – Olink , The product will supply to all over the world, such as: Swedish, Czech republic, Belarus, During in 11 years, We have participated in more than 20 exhibitions, obtains the highest praise from each customer. Our company has been devoting that "customer first" and committed to helping customers expand their business, so that they become the Big Boss !
By Cora from Japan - 2017.08.16 13:39
Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.
By Anne from Tajikistan - 2017.12.09 14:01