Best quality Sensor Cables - Molex IDE to dual SATA Power Adapter Y Cable – Olink
Best quality Sensor Cables - Molex IDE to dual SATA Power Adapter Y Cable – Olink Detail:
Model Number:sensor cable-06
Cable harnesses are usually designed according to geometric and electrical requirements. A diagram is then provided (either on paper or on a monitor) for the assembly preparation and assembly.
The wires are first cut to the desired length, usually using a special wire-cutting machine. The wires may also be printed on by a special machine during the cutting process or on a separate machine. After this, the ends of the wires are stripped to expose the metal (or core) of the wires, which are fitted with any required terminals or connector housings. The cables are assembled and clamped together on a special workbench, or onto a pin board (assembly board), according to the design specification, to form the cable harness. After fitting any protective sleeves, conduit, or extruded yarn, the harness is either fitted directly in the vehicle or shipped.
In spite of increasing automation, hand manufacture continues to be the primary method of cable harness production in general, due to the many different processes involved, such as:
Routing wires through sleeves,
Taping with fabric tape, in particular on branch outs from wire strands,
Crimping terminals onto wires, particularly for so-called multiple crimps (more than one wire into one terminal),
Inserting one sleeve into another,
Fastening strands with tape, clamps or cable ties.
It is difficult to automate these processes, with major suppliers still using manual means of production, only automating portions of the process. Manual production remains more cost effective than automation, especially with small batch sizes.
Pre-production can be automated in part. This affects:
Cutting individual wires (cutting machine),
Wire stripping (Automated Wire Stripping Machines),
Crimping terminals onto one or both sides of the wire,
Partial plugging of wires prefitted with terminals into connector housings (module),
Soldering of wire ends (solder machine),
Key Specifications/Special Features:
6-inch each in length (approximate)
Converts 4-pin Molex power to 2 SATA power connectors
One (1) 4-pin Molex connector
Two (2) SATA power connectors
- FOB Port:Shenzhen
- Lead Time:7 – 15 days
Main Export Markets:
- Central/South America
- Western Europe
- North America
- Payment Method:Telegraphic Transfer in Advance (Advance TT, T/T)
Primary Competitive Advantages:
- Experienced Staff
- Small Orders Accepted
- Green Product
- Product Feature
- Product Performance
Product detail pictures:
Related Product Guide:
Good quality comes 1st; assistance is foremost; business enterprise is cooperation" is our business enterprise philosophy which is regularly observed and pursued by our company for Best quality Sensor Cables - Molex IDE to dual SATA Power Adapter Y Cable – Olink , The product will supply to all over the world, such as: Bolivia, Jordan, Australia, For anyone who is keen on any of our items right after you view our product list, you should definitely feel absolutely free to get in touch with us for inquiries. You are able to send us emails and contact us for consultation and we shall respond to you as soon as we can. If it's easy, you may locate out our address in our web-site and come to our business for far more information of our merchandise by your self. We're always ready to construct extended and steady co-operation relations with any possible customers in the related fields.
By Eartha from Bahrain - 2017.11.12 12:31
The company keeps to the operation concept "scientific management, high quality and efficiency primacy, customer supreme", we have always maintained business cooperation. Work with you,we feel easy!
By Judith from Southampton - 2017.08.21 14:13