Best quality Sensor Cables - Molex IDE to dual SATA Power Adapter Y Cable – Olink
Best quality Sensor Cables - Molex IDE to dual SATA Power Adapter Y Cable – Olink Detail:
Model Number:sensor cable-06
Cable harnesses are usually designed according to geometric and electrical requirements. A diagram is then provided (either on paper or on a monitor) for the assembly preparation and assembly.
The wires are first cut to the desired length, usually using a special wire-cutting machine. The wires may also be printed on by a special machine during the cutting process or on a separate machine. After this, the ends of the wires are stripped to expose the metal (or core) of the wires, which are fitted with any required terminals or connector housings. The cables are assembled and clamped together on a special workbench, or onto a pin board (assembly board), according to the design specification, to form the cable harness. After fitting any protective sleeves, conduit, or extruded yarn, the harness is either fitted directly in the vehicle or shipped.
In spite of increasing automation, hand manufacture continues to be the primary method of cable harness production in general, due to the many different processes involved, such as:
Routing wires through sleeves,
Taping with fabric tape, in particular on branch outs from wire strands,
Crimping terminals onto wires, particularly for so-called multiple crimps (more than one wire into one terminal),
Inserting one sleeve into another,
Fastening strands with tape, clamps or cable ties.
It is difficult to automate these processes, with major suppliers still using manual means of production, only automating portions of the process. Manual production remains more cost effective than automation, especially with small batch sizes.
Pre-production can be automated in part. This affects:
Cutting individual wires (cutting machine),
Wire stripping (Automated Wire Stripping Machines),
Crimping terminals onto one or both sides of the wire,
Partial plugging of wires prefitted with terminals into connector housings (module),
Soldering of wire ends (solder machine),
Key Specifications/Special Features:
6-inch each in length (approximate)
Converts 4-pin Molex power to 2 SATA power connectors
One (1) 4-pin Molex connector
Two (2) SATA power connectors
- FOB Port:Shenzhen
- Lead Time:7 – 15 days
Main Export Markets:
- Central/South America
- Western Europe
- North America
- Payment Method:Telegraphic Transfer in Advance (Advance TT, T/T)
Primary Competitive Advantages:
- Experienced Staff
- Small Orders Accepted
- Green Product
- Product Feature
- Product Performance
Product detail pictures:
Related Product Guide:
During the past few years, our business absorbed and digested state-of-the-art technologies the two at home and abroad. Meanwhile, our firm staffs a group of experts devoted to your development of Best quality Sensor Cables - Molex IDE to dual SATA Power Adapter Y Cable – Olink , The product will supply to all over the world, such as: Russia, Italy, Italy, We have constructed strong and long co-operation relationship with an enormous quantity of companies within this business in Kenya and overseas. Immediate and specialist after-sale service supplied by our consultant group has happy our buyers. Detailed Info and parameters from the merchandise will probably be sent to you for any thorough acknowledge. Free samples may be delivered and company check out to our corporation. n Kenya for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.
By Ivan from India - 2018.09.29 17:23
The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
By Quyen Staten from El Salvador - 2017.04.18 16:45